XL Hydraulic Folding Gooseneck
The XL Hydraulic Detachable Gooseneck Eastern Canada Spec was customized to fit a specific need for hauling construction equipment in Eastern Canada. This exclusive lowboy trailer has all the specialized benefits for transporting extra large construction equipment.
Highlights
Low incline ramp makes it easy and safe to load, unload, and transport large equipment.
Hydraulic Folding Goose Neck is available with self-contained or wet line operated unit.
57” gauge rail submerged in gooseneck and deck.
One set of 8’ pin on aluminum gooseneck ramps with bolt on steel tip.
Multiple king pin settings are available to achieve proper load distribution, which makes it extremely versatile and compatible with almost any tractor or truck.
The neck adjusts to uneven terrain without the use of blocks, making it easy to load and unload almost anywhere.
Self-contained power unit is tucked away from damage either in the main deck or the wheel area.
XL’s new premium paint process, featuring sandblasting, includes a full 1 year warranty.
D.O.T. approved 12V sealed Grote harness with 7 year warranty.
Always striving to surpass market standards, all new XL products feature a 5 year structural warranty.
XL’s one piece construction results in stronger products. Trailer I-beams are made from one piece web and flange and then welded on all sides.
Standard Specs
CAPACITY
- 80,000 LB OVERALL
- CONCENTRATED: 120,000 LB IN 12' CLOSED
GOOSENECK
- FULL WIDTH HYDRAULIC FOLDING
- 9' 2" LONG
- 16" 32" KING PIN SETTING
- 102" 86" SWING CLEARANCE
- 50" 5TH WHEEL HEIGHT
- (3) BENT D-RINGS PER SIDE
- 2" APITONG DECKING
- LANDING GEAR ON DRIVERSIDE OF GOOSENECK AND SIDE OF MAIN DECK AT REAR OF DECK OVER CONTROLS, WITH WIDE FOOT WITH UPWARD TAPER ON ALL SIDES
- REINFORCED VANDALISM DOORS--NOT PIANO HINGED
- DECK PLATE
- 57" GAUGE RAIL SUBMERGED IN GOOSENECK AND DECK
- ONE SET OF 8' PIN ON ALUMINUM GOOSENECK RAMPS WITH BOLT ON STEEL TIP
SUSPENSION
- 25,000 LB AIR RIDE
- MANUAL RIDE HEIGHT CONTROLv
WHEELS & TIRES
- 8.25 X 22.5 STEEL RIMS
- 255/ 70R/ 22.5 H RATED TIRES
AXLES
- (3) 25,000 NOMINAL, 83 1/2" TRACKING
- DECAL FOR TOTAL HIGHWAY SPEED ALLOWED PER TIRE SIZE AND GVWR
- 54" AXLE SPACING
- 2S1M SPRING BRAKES ON 1 AXLES
- 15" X 8 5/8" BRAKES
- HUB PILOT, OUTBOARD DRUMS
- DECK PLATE
- HEND-TURNER / 25,000 CAPACITY/ AIR
REAR DECK
- 16' 10" LONG WITH 32" TRANSITION LENGTH
- 38" LOADED DECK HEIGHT
- STEEL TREADPLATE DECKING
- 1 BENT D-RING AT TOP CENTER OF TAILGATE
- 3 PAIRS OF PAN STYLE D-RINGS --LOCATED BETWEEN AXLES AND BEHIND LAST AXLE
- 20,000 POUNDS WINCH WITH 100' OF 9/16" CABLE; CABLE ROLLER AT TOP OF TRANSITION. CONTROLS AT REAR OF MAIN DECK, ON DRIVERSIDE, WITH POWER UNIT CONTROLS
- 11' 0" DECK TO REAR BRIDGE TRANSITION RAMP WITH BRACKETS ON BOTH SIDES. REMOVABLE FOR REPAIR OR REPLACEMENT. BOLTED ON DECK
- FRAME REINFORCEMENT, AIR, ELECTRIC AND BRACKETS FOR 1 AXLE BOOSTER
- RAISE AND LOWER VALVE
- WEST COAST SET UP WITH PIN STYLE LOCKS
- TRACTION AIDS ON REAR TRANSTION
- 2 STAKE POCKETS AT REAR OF TRAILER FOR WIDE LOAD SIGN
- SKID PLATES UNDER AIR BAG ARMS
HYDRAULICS
- 13HP HONDA SELF-CONTAINED POWER UNIT WITH DUAL HYDRAULICS
- ENGINE IN ROADSIDE BOLSTER
- COUPLERS OUT BOTH SIDES OF DECK AND ALSO OUT FRONT OF GOOSENECK
- ENGINE PULL START EASILY ACCESSIBLE AT ROADSIDE FRONT BOLSTER
- HYDRAULIC BYPASS VALVE
- BATTERY ON RUBBER MOUNTS
- EXTERNAL BATTERY CONNECTIONS TO BE MALE STUDS
- SELECTOR VALVE FOR ON-BOARD HYDRAULICS
- MANUAL PIN LOCKS
- SAFETY CHAIN HOOKS ON WEB
- HYDRAULIC HOSES UNDER GOOSENECK TO BE PLUMBED TO MINIMIZE CONTACT WITH GROUND
- BULKHEAD FITTINGS FOR AIR, ELECTRIC & HYDRAULICS MOUNTED TO FRONT OF GOOSENECK
- LOCKABLE TOOLBOX IN GOOSENECK
- STEEL TREADPLATE ON CENTER OF GOOSENECK
- 5 GALLON GAS TANK FOR AUXILARY POWER UNIT
- KEVLAR MATERIAL CYLINDER BOOT PROTECTORS
- RECESS MOUNTING BOLTS ON UNDERSIDE OF TRAILER FOR ANY HYDRAULIC EQUIPMENT MOUNTED IN CENTER REAR OF DECK
- DECK PLATE
LIGHTING
- D.O.T. APPROVED 12V SEALED HARNESS
- RUBBER MOUNTED LED LIGHTS
- (1) MID-TURN SIGNAL PER SIDE
- (2) CLEARANCE LIGHTS PER SIDE
- 7 POLE ELECTRICAL SOCKET
- 2 TAIL LIGHT PACKAGE WITH ALUMINUM COVER
MAIN DECK
- 19' 8" WIDE WITH 1 1⁄2" CAMBER
- 24" LOADED DECK HEIGHT
- 8" GROUND CLEARANCE
- 2" APITONG DECKING CENTER COVERED WITH SQUARE MESH
- 5 5/8" C-CHANNEL CROSSMEMBERS ON 12" CENTERS
- (2) 16" SIDE BEAMS
- 12" SWING OUT OUTRIGGERS BRACKETS ONLY ON 24" CENTERS
- 9 BENT D-RINGS PER SIDE - 18 TOTAL
- FRONT PIN-ON RAMP STORAGE BOXES IN ROADSIDE MAIN DECK BEAM WITH DOORS AND LOCKS. RAMPS SLIDE INTO DECK
- (2) TOOLBOXES WITH LOCKABLE COVERS LOCATED AT REAR OF MAIN DECK AT TRANSITION TO REAR BRIDGE
- (2) 1' OPEN TOOL WELLS AT FRONT OF MAIN DECK
- DECK PLATE
- RAIL TO BE 1/8" TO 1/4" BELOW WOOD ON TRAILER
- NO GAP BETWEEN RAIL AND WOOD DECKING ON DECK
- FRONT PIN ON RAMPS MUST BE REINFORCED AT THE ATTACHMENT POINT
- LIQUID FILLED AIR GAUGE
PAINT
- 1 YEAR WARRANTY
- BLACK, IH RED, OR NEW CAT YELLOW
- AIR & ELECTRIC DONE AFTER PAINT
- MANY CUSTOM OPTIONS AVAILABLE
OVERALL LENGTH & WIDTH
- OVERALL LENGTH: 48'
- OVERALL WIDTH: 102"